Tel: +86-371-86107816
Fax: +86-371-63797816
E-mail: [email protected]
Add: Fortune Plaza, Zhengzhou, Henan, China
Skype: tjccarl
Physical Properties of 316Ti Stainless Steel:
A.Chemical Composition(%):
C: 0.08 or less
Si 1.00 or less
Mn 2.00 or less
P 0.035 or less
S 0.030 or less
Ni 10.00 ~ 14.00 [TJC STEEL]
Cr 16.00 ~ 19.00
Mo 1.80 ~ 2.50
Ti acuity 0.2 ~ 0.70
GB/T1220-1992 has this provision, usually also called Mo2Ti or 316Ti
B.Mechanical Properties:
YS (Mpa) ≥205
TS (Mpa) ≥520
EL (%) ≥40
Hv around 200 °
Thickness: cold-tied 2B plate (0.09 -- 6.0mm);
Hot rolled industrial plate No.1(3-50mm) [TJC STEEL]medium thick plate, chemical plate, high temperature plate;
Width: 5mm-- 850mm steel belt;
1000, 1219, 1250, 1500, 1800, 2000mm coil plate, plate
Surface: 2B smooth surface, No.1 industrial surface, BA (6K) mirror, 8K mirror, 9K mirror, drawing surface, frosted surface.
Origin: Domestic, imported (Sweden,[TJC STEEL] Japan, Finland, South Korea, South Africa, Taiwan)
Key Properties of 316Ti Stainless:
These attributes refer to products in similar, but not identical, attributes that are specified in other products, such as plates and forgings in their respective specifications. The lower minimum pre - and post-heat[TJC STEEL] temperatures reduce the incidence of weld cracking and simplify welding. Low hardness decreases the heat affected zone to minimize deterioration in mold performance.