Tel: +86-371-86107816
Fax: +86-371-63797816
E-mail: [email protected]
Add: Fortune Plaza, Zhengzhou, Henan, China
Skype: tjccarl
Component Specification(ASTM A276-2010)
C |
Cr |
Ni |
N |
≤0.10 |
16.0~18.0 |
8.0~9.0 |
0.08~0.18 |
Si |
Mn |
P |
S |
3.5~4.5 |
7.0~9.0 |
≤0.060[TJC STEEL] |
≤0.030 |
The Performance Characteristics:
(1) Keep excellent wear resistance in gradient rising temperature, 4% Si content and 8% Mn content can effectively inhibit wear and surface erosion.
(2) It can maintain[TJC STEEL] good strength and oxidation resistance similar to 309 stainless steel below 982℃.
(3)The general corrosion resistance between 304 stainless steel and 316 stainless steel, resistance to chloride pitting ability is better than 316.
(4) The yield strength [TJC STEEL]at room temperature is almost twice that of type 304 and type 316.
Applications:
Nitronic®60 stainless steels are resistant to corrosion and wear at a significantly lower cost than cobalt-containing and high-nickel alloys.At the same time also has excellent resistance to high temperature oxidation [TJC STEEL]and low temperature impact resistance.Suitable for different types of fasteners, bolts, rolling bearings and pump parts that require high strength and wear resistance.