06Cr13 (0Cr13),410S,SUS410S,1.4000 Martensitic (Ferrite) Stainless Steel- TJC STEEL.

Tel: +86-371-86107816
Fax: +86-371-63797816
E-mail: info@tjcsteel.com
Add: Fortune Plaza, Zhengzhou, Henan, China
Skype: tjccarl

Link

06Cr13 (0Cr13),410S,SUS410S,1.4000 Martensitic (Ferrite) Stainless Steel- TJC STEEL.

06Cr13, the American standard 410S, is the lowest carbon content in the Cr13 martensitic stainless steel.Due to the microstructure of[TJC STEEL] the matrix under annealing condition, it is also classified as ferritic stainless steel in a few standards.

Standard Control

CHINA	GB/T 20878-2007	S41008	06Cr13 （0Cr13）
	GB/T 24511-2009	S11306
AMERICA	ASTM A240-15a	S41008,410S
JAPAN	JIS G 4304:2005	SUS410S
GERMANY	DIN EN 10088-2:1995[TJC STEEL]	X6Cr13,1.4000

Component Specification

GRADE	06Cr13*	410S	SUS410S	1.4000
C	≤0.08	≤0.08	≤0.08	≤0.08
Si	≤1.00	≤1.00	≤1.00	≤1.00
Mn	≤1.00	≤1.00[TJC STEEL]	≤1.00	≤1.00
P	≤0.040	≤0.040	≤0.040	≤0.040
S	≤0.030	≤0.030	≤0.030	≤0.015
Cr	11.5~13.5	11.5~13.5	11.5~13.5	12.0~14.0
Ni	(≤0.60)	≤0.60	(≤0.60)	—

*：S41008 is listed in the table, while S11306 is slightly different in composition.

Mechanical Property

Density（g/cm3）20℃[TJC STEEL]		7.75
Specific heat [kJ/(kg·K)] 0~100℃		0.46
Heat conductivity [W/(m·K)]	100℃	25.0
coefficient of linear expansion（10-6/K）	0~100℃	10.6
	0~500℃	12.0
specific resistance（Ω·mm2/m）20℃		0.60
longitudinal modulus of elasticity（kN/mm2）20℃		220
magnetism		Y

Mechanical Property

Dimensions of sample hairs（mm）		≤75
heat treating regime	anneal[TJC STEEL]	800 ~ 900 ℃ slow cooling Or about 750℃ fast cooling
	quench	950 ~ 1000 ℃ cold oil
	temper	700~750℃cold oil
Mechanical properties (quenching + tempering)	Specified non-proportionality Extension strength MPa	≥345
	strength of extension MPa	≥490
	Percentage elongation after fracture %	≥24
	Percentagereduction of area; reduction of area	≥60
The hardness of delivery HBW	anneal	≤183

Material Characteristics:

(1) The corrosion resistance and corrosion resistance are similar to 1Cr13 (410) and better, in low concentration of mild organic and [TJC STEEL]inorganic acid, alkali and some chemical conditions have corrosion resistance.

(2) Good oxidation resistance, sustainable use in 705℃ environment.

(3) good plastic toughness, easy to be formed by rotation, bending and rolling.

(4) It can be welded by common fusion and resistance technology.

Applications:

The main product form [TJC STEEL]is plate, used for structural parts such as automobile muffler and exhaust system components, but also widely used in containers, heat exchangers, underground pipes, etc.