Introduction:

1060 aluminum alloy plate is a commercially pure aluminum alloy renowned for its excellent formability, high electrical conductivity, and corrosion resistance. It belongs to the 1xxx series of aluminum alloys and finds extensive use in various industries due to its favorable properties.

 

Chemical Composition:

The typical chemical composition of 1060 aluminum alloy plate is as follows:

- Aluminum (Al): 99.6% min

- Silicon (Si): 0.25% max

- Iron (Fe): 0.35% max

- Copper (Cu): 0.05% max

- Manganese (Mn): 0.03% max

- Magnesium (Mg): 0.03% max

- Zinc (Zn): 0.05% max

- Titanium (Ti): 0.03% max

- Others (each): 0.03% max

- Others (total): 0.10% max

 

Mechanical Properties:

- Tensile Strength: 110 MPa (minimum)

- Yield Strength: 85 MPa (minimum)

- Elongation: 22% (minimum)

 

Physical Properties:

- Density: 2.70 g/cm³

- Electrical Conductivity: 62% IACS (International Annealed Copper Standard)

 

Hardness:

1060 aluminum alloy plate typically exhibits a Brinell hardness of approximately 30 HB.

 

Standard Compliance (ASTM B209, JIS H4000):

1060 aluminum alloy plate complies with international standards such as ASTM B209 and JIS H4000, ensuring quality and consistency in production.

 

Size Range:

1060 aluminum alloy plate is available in various sizes and thicknesses, typically ranging from 0.2 mm to 300 mm in thickness, with widths up to 2500 mm and lengths up to 12000 mm.

 

Non-Destructive Testing Standard:

Standard non-destructive testing methods, including ultrasonic inspection, are employed to ensure the quality and integrity of 1060 aluminum alloy plates.

 

Corrosion Resistance:

1060 aluminum alloy offers good corrosion resistance in various environments, particularly in atmospheric conditions. It is suitable for applications requiring resistance to corrosion.

 

Heat Treatment Condition:

1060 aluminum alloy plate is not heat treatable, as it is a commercially pure aluminum alloy. It retains its properties at ambient temperatures and does not require heat treatment for strengthening.

 

Main Applications:

- Electrical: Electrical conductors, busbars, and components requiring high electrical conductivity.

- Automotive: Automotive trim, decorative panels, and components.

- Reflectors: Reflective surfaces for lighting fixtures and solar panels.

- Packaging: Foil, containers, and packaging materials.

 

TJC Steel Supply Case:

TJC Steel supplies 1060 aluminum alloy plates, adhering to international standards such as ASTM B209 and JIS H4000. They ensure that the products meet rigorous quality requirements, providing reliable solutions for various applications across industries.

 

Conclusion:

1060 aluminum alloy plate offers excellent formability, high electrical conductivity, and corrosion resistance, making it suitable for various applications in electrical, automotive, reflective, and packaging industries. While it may have relatively low mechanical properties compared to other aluminum alloys, its favorable properties make it a preferred choice for specific applications requiring conductivity and formability.